Manual Bed,Electric Medical Bed,Electric Control Sofa Bed Better Medical Technology Co., Ltd. , http://www.fshospitalbed.com
Five defenses of leisure farm machinery
1. Anti-corrosion. (1) After the agricultural machinery is finished in the field, it is necessary to remove the external dirt, clean up the seeds, fertilizers, pesticides and crop residues in the working organization, and clean it with water or oil if necessary. (2) Clean all lubricated parts and re-lubricate. Apply rubbing oil to all friction surfaces, such as ploughshares, plow walls, openers, spade shovels, etc., preferably with stickers to reduce the chance of contact with air. . (3) It is best to store complex and precise tools in a cool, dry, ventilated room; simple equipment such as ploughs, rakes, and tampers can be kept in the open, but should be placed on high ground, dry and free from direct sunlight. Place, it is best to cover the cover; all parts directly contact with the ground, the use of wood or brick support; fall off the protective paint to re-painted. 2. Corrosion, mildew. (1) The wooden parts are rotted, cracked, and deformed due to the action of microorganisms, rain, wind, and sunlight. The effective storage method is to paint the exterior of the wood and place it in a dry place. Do not receive it. Sun and rain. (2) Textiles, such as canvas conveyor belts, are improperly stored and are easily rotted. Such products should not be placed in the open air, they should be removed after cleaning and drying, and stored indoors in a dry and pest-proof and rodent-proof place. 3. Anti-aging. Due to the oxygen in the air and the ultraviolet rays in sunlight, rubber or plastic products are susceptible to aging and deterioration, making the elasticity of rubber parts worse or easily broken. For the storage of rubber parts, it is best to use hot paraffin oil on the surface of the rubber, be sure to put it on the indoor shelf, cover it with paper, keep it ventilated, dry and free from direct sunlight. 4. Anti-deformation. Parts such as springs, transmission belts, long shanks, and tires will be plastically deformed due to prolonged stress or improper placement. To this end, proper support shall be provided under the rack; the tires shall not be subjected to load; all pressing or pulling on the machine The spring must be loosened; remove the drive belt and keep it in the room; some of the easily deformable parts removed should be laid flat or hung vertically; and the parts removed, such as tires, seedlings, etc., must be stored to prevent accumulation. Extrusion, pressure deformation. 5. Loss prevention. For long-term parked equipment, a registration card shall be established to record the technical status, attachments, spare parts, tools, etc. of the equipment in detail; various types of tools shall be kept by special persons; it is forbidden to disassemble parts for other purposes; when the equipment is parked outdoors, the motor, Belts and other easy-to-lost items are removed and marked and stored indoors.