Because potato harvesters have a large workload and consume a lot of power, it is important to maintain them. After the first operation is completed, the soil on the harvester parts must be removed first, and the remaining potato hulls, shredded stems, and other attachments must be removed every day. In particular, weeds and other attachments must be completely removed. One week after the harvester is used, grease is added to joints, bearings, etc., and other lubrication points are inspected and supplemented. Second, check the belt wear of the harvester. If the belt of the harvester is worn out, replace the belt with a new one. Lubricate all the friction parts in time; all the outer chains are lubricated with oil every day. Every 3-5 days, the chain should be removed and cleaned in the oil. The problems found during the inspection should be promptly adjusted or repaired to eliminate the existing failures and avoid new failures. Check whether the fastening parts of the rack, wheel train, spare nut, or anti-loose pin shaft are loose or fall off, and tighten and replace in time. When the third harvester is storing, it is necessary to select a place for ventilation and shading. Raise the rack with bricks or other objects to make the excavating shovel and the depth wheel away from the ground. Finally, cover the harvester with a plastic cloth. The removed power shaft, hydraulic tubing, and ground wheels are best placed on shelves and placed neatly to prevent damage.
Different from absorbing the medicine through intestine, with Infusion and Injection ,medicine is more quickly integrated into the blood stream, thus allowing it to work faster and more focused. Injections and infusions are strictly carried out with disposable products, so as to avoid cross contamination and prevent infectious transfers. The application of injections can take place in a variety of manners. However, most involve subcutaneous, intramuscular or intravenous methods.
In the Infusions/Injections category, Yingmed offers you everything you need for injection and infusion procedures: Syringe , Cannula, Disposable Infusion set, Infusion Stand.
In order to avoid infection,some disinfection products must be used before or after puncture, such as Cotton swab,Povidone-idoine swabstick , Cotton ball, Alcohol pre pad, Povidone-idoine prep pad , Non-woven surgical tapes, Infusion plaster, IV cannula dressing, Alcohol prep pad and ect. You will find these items in the category of Yingmed Wound Dressing.
Or, you can directly contact with Yingmed customer service for the details.
Sterile Insulin Injector,Single-Use Insulin Syringe,Infusion Set Medical,Parts Of Infusion Set,Disposable Syringe,IV Cannula With Injection Port,Infusion Set NINGBO YINGMED MEDICAL INSTRUMENTS CO.,LTD , https://www.chinayingmed.com
Cotton Swab
Infusion plaster
IV cannula dressing
Non woven surgical tape