How to remove carbon from the engine

1, mechanical method

Metal brush, blade and broken piston ring can be used to remove coke. However, because this method is easy to scratch the surface of parts, it is not necessary to use abrasive cloth and steel spatula to remove coke on the precision parts. It can be removed with wood, bamboo or copper spatula, or it can be rubbed back and forth on the cork board. . After removing the coke from the part mechanically, it must be carefully cleaned with oil. This method is simple and does not require equipment, but the disadvantage is that the hard-to-reach parts of the carbon deposit are not easy to clean.

2, chemical method

Put the parts in the prepared chemical solution, soak them for a period of time to soften and loosen the coke. Then remove the parts, use a brush or a cotton wire to remove coke, wash it with hot water, and dry it.

Long Range LiDAR Radar

Long distance LiDAR sensor IT03M series are particularly easy to communication thanks to their fixed connector, which can be plugged it up and off by yourself. Voltage is wider from 3.3v before to 3.6v. Low power consumption feature makes it beceome a very competitive, high performance-price ratio, long range Laser Distance Sensor.

Highlights:

> Measurement frequency: 100 Hz (Max 200 Hz)
> High temperatures: -10~+50℃
> UART output
> Connector design: easy to use

Parameters of IT03M:

Speed Laser Sensor,Long Range Lidar,Long Range 3D Lidar,Long Range Radar Sensor

Chengdu JRT Meter Technology Co., Ltd , https://www.cdlaserrangfinder.com