The disc granulator is a production part of the compound fertilizer equipment production line. Its function and function have been explained in detail in the previous news center. Mechanical equipment is faulty, and failure will affect its use characteristics. The host is a very important part of it. How to solve the problem if the host current is unstable during the running process? Before the solution, let's take a look at the cause of the unstable current of the main body of the disc granulator, so that the right medicine can be prescribed. The main reason is mainly because the feeding of the main equipment of the equipment is not uniform and the damage of the main shaft is not good or the bearing damage is good. The failure of the heating coil of some granulators will also cause the screw adjustment pad to be wrong. There are reasons for this in operation. The solution is to conduct a comprehensive inspection of the equipment. Check the feeder of the equipment. After the effective troubleshooting, main motor, bearing, etc., check whether the heaters of different parts can operate normally and ensure that the various components can operate normally. Of course, it is also possible that the host current is unstable due to other reasons. When this happens, it is necessary to find the cause in time and eliminate it to ensure that the device can operate for a long time.