According to the practice of raising sows for many years, a simple, practical and practical sow winter litter piglet incubator was introduced. Specific approach: In the corner of the back wall of the sow house, a rectangular brick incubator with a height of 80 cm, a width of 50 cm, and a height of 1 meter is built on a single brick block. A 1515 cm hole is left outside the bottom of the incubator for piglets Freedom to go in and out, in the incubator before giving birth on the bottom of the incubator on a soft mat grass or cotton pads, hanging a 60-degree bulb on the top, 18 hours after opening the lamp within 1 week after the light gradually reduce the time, according to the weather conditions Flexible control, sows postpartum, until all the piglets eat colostrum, the piglets are manually caught in the incubator, the import and export are plugged first, and the piglets are released for feeding after 1-2 hours. 3 times, after the piglet finished eating milk, he would return to the incubator. The benefits of doing so: First, anti-pressure, the second is to keep warm, the third is to reduce the activity of piglets to avoid self-bite, bite the phenomenon of nipples occur, four can reduce the occurrence of yellow and white piglets. Also can be used to cut into two sections of scrap iron, open a 1515 cm hole at the bottom, the practice is the same as the above method, but better warming effect. By using the above methods to raise sows for many years, the survival rate of winter piglets is above 98%, and sometimes even as high as 100%. The role of small incubators cannot be ignored and it is worth referring to the large numbers of scattered farmers.
ETR Oxygen Cylinder Filling System
By PSA principles, ETR PSA oxygen generators generate 93%±2% purity oxygen gas directly from compressed air. ETR oxygen cylinder
filling plant is consisted of Atlas Copco air compressor, Parker dryer and
filters, air buffer tank, ETR Psa Oxygen Generator, oxygen buffer tank,
oxygen receiver tank, diaphragm oxygen booster, filling station and control
cabinet.
Compressed air is purified through the air dryer and
filters to a certain level for main generator to work with. Air buffer is
incorporated for smooth supply of compressed air thus to reduce fluctuation of
compressed air source. The generator produces oxygen with PSA (pressure swing
adsorption) technology, which is a time proven oxygen generation method. Oxygen
of desired purity at 93%±2% is delivered to oxygen buffer tank for smooth supply
of product gas. Oxygen in buffer tank is maintained at 4bar pressure, then
reach to 150bar to filling cylinders with an oxygen booster.
Oxygen Cylinder Filling System Oxygen Cylinder Filling System,Homefill Oxygen System,Oxygen Refilling Plant,Oxygen Refilling Station Hunan Eter Electronic Medical Project Stock Co., Ltd. , https://www.centralgas.be
