Cable seal is a kind of security seal with a metal locking body and a piece of cable. The cable seal is designed to used on container doors,railway containers, truck tailers, Big tanks etc. The cable seals have many different sizes. The cable can be in galvanized cable and stainless steel cable, aircraft cable is also available in our company. The cable length can be customized according to customer's requirement. The cable diameter can be 1.5mm, 1.8mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 5.0mm. The cable seal locking body can be in aluminum material or zinc alloy. To better protect the printing information, the locking head can be wrapped by plastic as well.
Steel Cable Seals,Cable Seals Security Seals,Cable Security Seals,Fixed Cable Seal Wenzhou Haoshi Light Industrial Products Co., LTD , https://www.economicseals.com
Operational precautions for linear filling machine
The linear filling machine plays an important role in the current processing industry. It is one of the necessary equipment for the production and processing of many food, beverage, medicine and daily chemical enterprises, and plays an increasingly important role in our life. For the enterprise, the use of the filling machine is not a problem, but in its maintenance and maintenance, few people know. Here, the relevant technical personnel of Zhangjiagang City's Lingguan Machinery will make the following explanation based on past experience.
First, before using the filling machine, brushing machine and bottle washer,
1. Install and then debug. Read the instructions carefully before commissioning and prepare the tools to be used.
2. After the installation, brushing machine and rinsing machine are installed, the filling track and the bottle receiving tray are leveled, the liquid storage tank is filled with materials, and all the electrical switches are in the closed position.
3. The container filled with the large bottle of water linear filling machine is inserted into the tool box, and the external power supply is connected. The power socket must be a three-pin socket and have a reliable grounding wire to prevent the machine from leaking electricity. When it is ON, the power indicator lights up.
4. The mounting support plate holds the filling frame and points to the positioning sleeve on the top filling head. The positioning sleeve should be able to move up and down flexibly, and the filling needle is exposed or retracted without hindrance.
5. The switch under the liquid storage tank is turned to the open position, so that the material can flow into the total metering pump. According to the total filling amount of each container, adjust the screw on the crank and rotate the knob of the filling speed control board to 20 degrees. Left and right, then turn the switch on the filling speed control board to the open position.
6. When the filling head is out of the liquid for the set amount, screw the liquid amount fine-tuning nut, cover the filling head casing, and loosen the filling bracket support plate.
After the linear filling machine is used, pay attention to its maintenance. When removing and disassembling the piston during maintenance, remove the fixing screws at the same time to avoid affecting the other process requirements when disassembling. Before cleaning the large bottle of water straight line filling machine, the remaining product should be cleaned and then filled with soft cleaning liquid. The cylinder has been lubricated at the factory. Please do not open or add any lubricating oil to ensure that the surface of the filling machine is clean and hygienic. In addition, while maintaining and properly using the filling machine, it is necessary to conduct regular inspections and commissioning. Only such a filling machine can work healthily and steadily.