What are the main points of the dryer automation control system?

Dryer automation control system operation 6 major points:
1. Set three control modes: centralized control, local and single-stop, and can be easily converted without affecting the running status of the original equipment. Single-stop single-stop has multiple parking conditions to prevent misoperation.
2. The reverse logistics sequence program starts the car, and the program stops after the unloading of each device.
3. The lock-up relationship between the devices is always established during the centralized start-up, parking and operation.
4. With start, stop warning signal and prohibition and equipment failure alarm signal.
5. In the process of starting and running, if a certain equipment failure causes the equipment and the equipment blocked by it to stop, after the accident is lifted, the vehicle can be predicted by the vehicle, and the faulty equipment starts to continue to follow the reverse logistics direction. Or single, if the fault is large, it can be easily transferred to the program to stop or stop.
6. During the parking process, if a certain equipment fails, the equipment and the equipment that is locked by it will stop immediately and the equipment that is not locked by it can still stop according to the procedure.

Chaise Lounges

double chaise lounge,Chaise Lounges,leather lounge chaise

Guangzhou LoPhiDa Co.Ltd , https://www.widinlsamachine.com