The smoke generator is one of the main components of the smoking furnace. The smoking material used is the daily wood, and the wood generates smoke under incomplete combustion. The concentration, temperature and humidity of the smoke will have an effect on the smoking effect. How to generate smoke: 1. Similar to the traditional method of producing tobacco, smoke is generated when the burning substance is burnt insufficiently or in a semi-combustible state. It is common to add wood chips mixed with moisture to the electric burner so that it does not completely burn to produce smoke. 2. Friction and smoke: Compared with the old method, in ancient times, the wood was fired. When the wood was not completely burned, the wood would be heated to generate smoke. The principle of the dynamic heating method is similar to the wet heat decomposition method. The difference is that the heating medium is air of 300 to 400 ° C, and the heating medium of the wet heat decomposition method is a mixture of water vapor and air; the wood chips are driven by compressed air into the reaction chamber; The wood chips of the wet heat decomposition method rely on the transmission of the spiral belt. Sometimes the smoke concentration is not enough. The smoke generated by the smoke generator enters the booster zone under the action of the blower. The steam booster zone is equipped with a steam nozzle. After the high-speed steam is mixed with the smoke, it is increased. The purpose of pressure and humidification. This is a widely cited method of smoke enrichment. Natural Aesculetin,Cas 531-75-9,Aesculetin Extract ,Aesculetin Extract Powder Shaanxi The River Pharmaceutical Co., Ltd. , http://www.dahepharma.com