1. Machine Introduction:
The high degree of automation, the use of positioning rotation practices, making masks at high speed process, ultrasonic welding and cutting to achieve the perfect combination; machine adopts high quality alloy production, ensure that the equipment is not back in the welding, mask when cutting no glitches, automatic level adjustment dial is rotated so as to effectively guarantee the quality of a mask.
Machine Features:
1. It adopts PLC control, man-machine interface touch-screen display, it shows humanized operating concept;
2. Ultrasonic welding, cutting knife with a special feeding device, welding punching once completed, press edges firmly and does not hurt exquisite materials;
3. Welding and cutting material two heads simultaneously, six station automatic turntable, precise movements without deviation;
4. This machine only need two people feeding, discharge, convenient operation, high yield, is absolutely N95 mask manufacturers preferred products.
Ribbon Cutting Machine,Ultrasonic Cutting Machine,Automatic Ribbon Cutting Machine,Ultrasonic Fabric Cutting Machine Dongguan Huitong Automatic Machinery Technology Co., Ltd , https://www.medicalmaskmachines.com
First of all, we would like to remind everyone to check the vibrating screen regularly and find the problem and repair it accordingly.
Then let's take a look at the repair method of the vibrating screen:
1. The problems found in the periodic inspection of the vibrating screen should be repaired.
Shaker repairs include 1 timely adjustment of the belt tension, 2 replacement of the new belt, 3 replacement of the worn screen surface and longitudinal gasket, 4 replacement of the damping spring, 5 replacement of the rolling bearing, transmission gear and seal, 6 replacement of damaged bolts, repair Damage to the screen frame member, etc.
2. The side plates and beams of the screen frame should be protected from stress concentration. The vibrating screen is not allowed to be welded on these members.
The vibrating screen should be replaced in time for the cracking of the lower beam. When the crack is found on the side plate, the hole should be drilled 5mm at the end of the crack, and then the reinforcing plate should be added at the cracking part. The disassembly, repair and assembly of the exciter shall be carried out by a dedicated person in a clean place.
3. Check the wear of the rolling bearing after the vibrating screen is removed. The vibrating screen checks the tooth surface of the gear. The vibrating screen checks the connection of each component. The lubrication circuit in the vibrating screen cleaning box makes it smooth. The vibrating screen removes the attachments on each joint surface and vibrates. The screen replaces all seals and other damaged parts.
4. Special attention should be paid to the maintenance of vibrating screen:
(1) The exciter and transmission device should be dismantled by experienced technicians. The vibrating screen is strictly prohibited from being barbaric. The vibrating screen prevents damage to the equipment. Keep the parts clean before assembling the shaker.
(2) The new screen after the vibrating screen replacement should be re-tensioned every 4-8h, and the vibrating screen should be fully tensioned.
Xinxiang Sanjiang Vibration is a professional manufacturer of screening equipment. For many years, it has been committed to the research and equipment innovation of vibrating screen technology, and strive to build more advanced equipment to serve more customers! My company's main products are: vibrating screen, vibration motor, hoist, conveyor and other products.
Common maintenance methods for vibrating screens
Today, a customer purchased a vibrating screen produced by Xinxiang Sanjiang, mainly for screening food. Due to the high usage rate, the customer took the initiative to ask our company some common methods of vibrating screen maintenance! Engineers have summarized a few of them based on past experience and hope to help the majority of shaker users!