The drying oven is used for drying and dry heat sterilization of articles, and the incubator is used for the cultivation of microorganisms and biological materials. The structure and usage of the two instruments are similar. The drying oven is used at a temperature range of 50 to 250 ° C. The blast-type electric heating is used to accelerate the temperature rise. The oven's zui high operating temperature is 60 °C. Digital 60m short range laser rangefinder is a laser measurement device which is supposed to replace tape measure, ruler, and other traditional length meauring tool. Laser ruler as its name, it is a electronic ruler which user laser to measure distance. 60M Laser Measure,60M Laser Distance Measure,Laser Distance Measure Oem,60M Digitial Laser Distance Measure Chengdu JRT Meter Technology Co., Ltd , https://www.accuracysensor.com
Insert the thermometer into the seat (in the middle of the top bleed regulator).
Plug the power cord into a power outlet.
Turn the heating wire group into the 1 or 2 position (depending on the desired temperature), at which point the blower can be turned on to promote hot air convection. When the heating wire group is turned on, the red indicator light is on.
Pay attention to the thermometer. When the temperature of the thermometer is about to reach the required temperature, adjust the automatic temperature control knob so that the green indicator light just lights up. Observe the thermometer and indicator light after ten minutes. If the temperature indicated by the thermometer exceeds the demand and the red indicator light is still on, then Rotate the automatic temperature control knob slightly counterclockwise to adjust the temperature to the required temperature. The indicator light turns red and green.
The automatic thermostat knob is on the upper left side of the front of the cabinet. Its scale plate cannot be used as a temperature standard indicator and can only be used as a marker for adjustment.
In the constant temperature process, if three sets of heating wires are not required to be simultaneously heated, only one set of heating wires can be turned on. The more the number of open groups, the faster the temperature rises.
After working for a certain period of time, you can open the top center venting regulator to discharge the moisture, or you can turn on the blower.
After use, turn off the heating wire grouping switch and turn the knob of the automatic thermostat to the zero position in the counterclockwise direction.
Unplug the power plug
Our laser measurer has Multiply fuctions:
1. Height measure & Length measure &Distance measure
2. Area Measure
3. Volume Measure
4. Pythagorean Measure