Important factors that must be considered for cold storage installation

Cold storage installation has important factors that must be considered

When the cold storage installation is installed, it is important for Zui to be able to do the basic things of our Zui and to be able to put ourselves in the shoes of our customers. So what do you need to do to install the cold storage? Let's take a look!

1. The cold storage is installed in a strong and stable place.

2. The cold storage is installed in a place with good ventilation and low humidity. The cold storage is installed in a place protected from light and rain.

3. The drainage in the cold storage is drained by the drain pipe. Water is often discharged, so the drainage should be directed to a place where it can flow smoothly.

4. A combined cold storage installation requires a horizontal concrete base. When the base is tilted and the bump is formed, the base must be repaired and flattened. Cold storage installation has important factors that must be considered

5. The combined cold storage partition wall board is fixed by the partition wall angle steel.

6. After the combined cold storage warehouse is installed, check the fitting of each joint. If necessary, the inside and outside should be filled with silica gel.

7. The cold storage should leave the heating appliance.

8. U-shaped pipes are not installed on the drain pipe, which sometimes causes the unit to be corroded.

9. In the hot place, the cold storage will not only reduce the cooling efficiency, but also damage the storage board. In addition, the ambient temperature of the unit to ensure normal operation is within 35 degrees. Also leave room for overhauling the unit.

10. When assembling the board, pay attention to the complete paste of the sponge tape on the convex edge of the library board. When installing the cold storage board, do not collide. The location of the sponge tape. Cold storage installation has important factors that must be considered

11. U-shaped pipe must be installed on the drain pipe. U-shaped pipe can be installed to prevent cold air leakage, insect and mouse invasion.

12. Due to the wide variety of cold storage library boards, the installation of the cold storage should refer to the “cooling assembly diagram”.

13. When tightening the hook, slowly and evenly apply force, screw it to the board and sew it together, and the force is not excessive, so as to avoid the hook box being pulled out.

14. The combined cold storage is used in the house. When installing outside the house, it is necessary to install a cover that blocks sunlight and rain.

15. After the pipeline and electrical installation are completed, all the pipelines on the combined cold storage library board shall be perforated and sealed with waterproof silicone.

Shanghai Xueyi Refrigeration is a refrigeration engineering company engaged in cold storage installation, cold storage design, cold storage after-sales maintenance and repair. The cold storage construction team has many years of on-site construction experience. Welcome to: