Sawdust is the best fermented mattress material because sawdust has the highest carbon nitrogen ratio and is most resistant to fermentation in all litter. At the same time, loose and porous sawdust, air permeability and water retention are also better. The fineness of sawdust is just right for the requirements of a fermentation bed. Due to the difference in wood and processing methods, the type, humidity, and quality of sawdust vary greatly and should be carefully managed during purchase and use. So, how to measure the density and moisture content of sawdust? The technicians of the golden baby dry fermentation machine teach you how to measure the sawdust density and moisture content, and finally calculate the sawdust weight for your reference: Rectangular carton: length 0.35m, width 0.19, height 0.21m (volume=0.014 m3) FCL (loose): 5.61kg FCL (loose): 3.13kg (not full boxes) FCL (Loose) Loss of Water: 5.61-3.13 / 5.21 = 47.60% (Not Full) Recommended reading: Fruits And Vegetables,Fresh Fruits And Vegetables,Fresh Fruit And Veggies,Fresh Vegetables Xi'an Gawen Biotechnology Co., Ltd , https://www.agolyn-bio.com
Electronic scales: Sawdust to exactly 2 digits: Fresh sawdust just brought back from sawdust
FCL (compaction): 7.54kg
Box weight: 0.4kg
The density when fresh sawdust is loose Ï1=5.61-0.40/0.014=3.72*10^3 kg/m3
Fresh sawdust real-time density Ï2=7.54-0.40/0.014=5.10*10^3 kg/m3
FCL (loose): 3.58kg (full container)
FCL (compaction): 4.60kg
Box weight: 0.4kg
Density when dried sawdust is loose Ï1=3.58-0.40/0.014=2.27*10^3 kg/m3
Drying sawdust real-time density Ï2=4.60-0.40/0.014=3.00*10^3 kg/m3
FCL (loose) Loss of water: 5.61 - 3.58/5.21 = 38.96% (full box)
FCL (compaction) Loss of water: 7.54-4.60/7.14 = 41.18%
The overall calculated water loss: 5.61+7.54-3.13-4.60/(5.21+7.14)=43.89%
Average dehydration content: (47.60%+38.96%+41.18%+43.89%)/4=42.90%
The following conclusions can be drawn: 1 The total volume of dried fresh sawdust during drying is reduced; 2 The average water content of fresh sawdust is approximately 60% to 65%, and the average density is 4.41*10^3 kg/m3 ( A ton of about 2.5 square meters) 3 dried sawdust average water content of about 15% to 20%, the average density of 2.64 * 10 ^ 3 kg/m3 (a ton of about 3.8 square) can consult: Beijing Huaxia Kangyuan Technology Limited The company's telephone toll-free hotline Taobao purchase fermentation strains please click
1, sawn wood + goldfish special bacteria: swine pig manure automatically disappear? _[Sawdust Swine Law]
2, fermentation mattress material production matrix cultivation of high quality soilless watermelon