The three-servo pillow packaging machine is a continuous packaging machine with a very strong packaging capacity and suitable for a variety of food and non-food packaging. It can be used not only for the packaging of unbranded packaging materials, but also for high-speed packaging using reel materials pre-printed with a logo. The three-servo pillow packaging machine has a large market share in the packaging machinery industry. Many customers have not fully understood the three-servo pillow packaging machine. In fact, the comprehensive three-servo pillow packaging machine maintenance is divided into three steps, the mechanical part. Electrical parts and mechanical lubrication. Guangzhou Zhongzhinan Supply Chain Co.,Ltd. , https://www.zhongzhinanlighting.com
Maintenance of the electrical part of the three-servo pillow packaging machine:
1. The operator of the three-servo pillow packing machine should always check whether the wire ends of the joints are loose before starting the machine;
2. Tiny particles such as dust may also affect some functions of the packaging machine. When the probe of the photoelectric switch or the proximity switch is dusty, it may cause malfunction, so it should be checked and cleaned frequently;
3, the details of the part is also the focus of mechanical cleaning, such as regular use of soft gauze 蘸 alcohol to clean the surface of the horizontal seal electric slip ring, remove the surface of the toner;
4. Some parts of the three-servo pillow packaging machine cannot be changed at will. Non-professionals must not open the electrical part. The parameters or procedures of the inverter, microcomputer and other control components have been set. Any change will cause the system to malfunction. jobs.
Lubrication of three servo pillow packaging machine:
1. The rolling bearing is a part with serious wear in the machine, so each rolling bearing should be greased once with a grease gun for about two months;
2. Different types of lubricating oils are different, such as the bushing on the wrapping roller of the packaging film, and the bushing at the front sprocket of the feeding conveyor should be filled with 40# mechanical oil;
3, the bite operation of the gear is also very important, each gear should be timely instilled 40# mechanical oil;
4, the lubrication of the chain is common in Zui, relatively simple, each sprocket chain should be timely infusion of mechanical oil with a kinematic viscosity greater than 40#;
5. The clutch is the key to the start of the packaging machine. The clutch part should be greased at the right time.